Справочник Пользователя для Sony HDCU3300

36

Locations and Functions of Parts

a Red tally indicator
Lights in red when this unit receives a red tally signal. 
When the CALL button on the video camera, the MSU-
900 series Master Setup Unit, the RCP-700/900 series 
Remote Control Panel, etc. is pressed, this indicator will go 
out if previously lit, and light up if previously off.
You can attach the supplied number plate here.

b Green tally indicator
Lights in green when this unit receives a green tally signal. 
You can attach the supplied number plate here.

c MIC (microphone) switch
Press to turn the intercom microphone on and off.

d INTERCOM level control
Turn to adjust the input level of the intercom.

e CABLE ALARM indicators
SHORT (red): Lights in red if the power supply cord of 

an optical fiber cable is short-circuited to its external 
sheath, or if two power supply cords are short-
circuited. Power is not supplied to the camera when 
this indicator is lit.

OPEN (red): Lights in red when a camera is not connected 

to the CAMERA connector on the rear panel of this 
unit via an optical fiber cable.
Flashes when the connection status of an optical fiber 
cable is bad.

f MAIN POWER switch and indicator
Turns the entire camera system on and off, including this 
unit, the video camera, and the RCP-700/900 series 
Remote Control Panel connected to the REMOTE 
connector of this unit.
Press the “?” side to turn the camera system on, and the 
“a” side to turn it off. 
The indicator lights when the power switch is turned on.

g CAMERA switch and indicator
Turns the video camera on and off when the MAIN 
POWER switch is turned on.
Press the “?” side to turn on the video camera and the “1” 
side to turn it off.
When the CAM PW button of the remote control panel 
connected to this unit is set to off, you can’t turn on the 
video camera with this switch only. 

1

HD CAMERA CONTROL UNIT HDCU3300 

1

2

3

4

5

6

7

8