Справочник Пользователя для Sony HDCU3300
37
Locations and Functions of Parts
h INTERCOM connector (XLR 5-pin)
Connect a headset.
Connect a headset.
To use a headset with a plug other than an XLR 5-pin plug,
consult a Sony service or sales representative.
consult a Sony service or sales representative.
Rear Panel
a SDI OUT area (BNC-type)
The signal from the video camera may be output as two
HD-SDI or SD-SDI signals.
The signals output from the SDI OUT 3 and SDI OUT 4
connector can be superimposed character and marker.
SD-SDI signals are output only when the system is
operating with a field frequency of 59.94/50 Hz.
The signal from the video camera may be output as two
HD-SDI or SD-SDI signals.
The signals output from the SDI OUT 3 and SDI OUT 4
connector can be superimposed character and marker.
SD-SDI signals are output only when the system is
operating with a field frequency of 59.94/50 Hz.
For details on the field frequency setting, contact a Sony
service or sales representative.
service or sales representative.
b HD SDI OUTPUT area (BNC-type)
The normal speed video signal from the video camera can
be output as four HD-SDI signals.
The normal speed video signal from the video camera can
be output as four HD-SDI signals.
c SUPER MOTION OUTPUT area (BNC-type)
The HD super slow motion signals from the video camera
can be output as two LINK-A, LINK-B or LINK-C
signals. The connectors below are spares.
The HD super slow motion signals from the video camera
can be output as two LINK-A, LINK-B or LINK-C
signals. The connectors below are spares.
The connectors in this area do not supply the color bar
signals while the power to the video camera is ON (default
setting). There is a setting on the setup menu to supply the
color bar signals even if the power to the video camera is
signals while the power to the video camera is ON (default
setting). There is a setting on the setup menu to supply the
color bar signals even if the power to the video camera is
ON. With that setting, the color bar signals are also
supplied to the viewfinder on the camera.
supplied to the viewfinder on the camera.
For details on the setup menu, contact a Sony service or
sales representative.
sales representative.
d RETURN INPUT area
1
HD-SDI 1 to 4 (HD-SDI return video input 1/2/3/4)
connectors (BNC-type)
connectors (BNC-type)
Four different HD-SDI return video input signals may be
received independently.
The selection of RET 1, 2, 3, or 4 is made by the return
switch of the video camera.
The type of input signal on RET 1, 2, 3, and 4 may be set
individually using the setup menu, or using the MSU-900
series Master Setup Unit.
received independently.
The selection of RET 1, 2, 3, or 4 is made by the return
switch of the video camera.
The type of input signal on RET 1, 2, 3, and 4 may be set
individually using the setup menu, or using the MSU-900
series Master Setup Unit.
For details on the setup menu, contact a Sony service or
sales representative.
sales representative.
Refer also to the Master Setup Unit manual.
SUPER MOTION OUTPUT
SDI OUT
HD SDI
OUTPUT
SLOT2
SLOT1
C
A
B
SLOT3
9
CAMERA connector
w;
AC IN connector
0
Expansion slots
qa
INTERCOM/TALLY/PGM connector
4
RETURN INPUT area
6
INPUT area
8
OUTPUT area
qs
MIC REMOTE connector
1
SDI OUT area
5
Ethernet connector
qd
WF REMOTE connector
qf
TRUNK LINE connector
qg
I/O PORT connector
ql
MIC1, MIC2 connectors
qk
TRUNK A connector
qj
RCP/CNU connector
qh
WF MODE connector
7
Spare connector
3
SUPER MOTION OUTPUT area
2
HD SDI OUTPUT area
7
Spare connectors
Note