Справочник Пользователя для Sony HDCU3300

Скачать
Страница из 52
42
Locations and Functions of Parts
For details on these operations, refer to the Master Setup 
Unit or Remote Control Panel manuals.
WF OUT (waveform monitor output) connector 
(BNC-type)
Outputs the video signal for a waveform monitor selected 
with the WF MONITOR button of an RCP-700/900 series 
Remote Control Panel or MSU-900 series Master Setup 
Unit.
For details on these operations, refer to the Master Setup 
Unit or Remote Control Panel manuals.
HKCU1005 SDI Output Expansion 
Unit (optional)
To reduce the risk of electric shock, fire or injury, do not 
open the cabinet. To adjust the internal settings, refer to 
qualified service personnel.
The HKCU1005 consists of a DRX front board and a HIF 
rear boards. 
When these boards are installed in the front and rear 
expansion slots of the unit, four SDI output connectors are 
added to the unit.
For details on installation, contact a Sony service or sales 
representative.
DRX Board
Output signal format indicators
Displays the format status of the output signal.
1080/720P/SD: One of these indicators corresponding to 
the signal status of the SDI OUTPUT 1, 2 connectors 
of the four SDI signal output from this unit lights.
PsF: Not function
FC: Lights when the frame rate converter function of the 
unit is performed.
60/50/30/25/24: One of these indicators corresponding to 
the field/frame frequency of the output signals lights.
The 30, 25, and 24 indicators do not function on the 
HDCU3300.
HIF Board
SDI OUT1, 2, 3, 4 (HD/SD serial digital interface 
output 1 to 4) connectors (BNC-type)
The signal from the video camera is supplied as four HD-
SDI or SD-SDI signals.
Note
DRX
1080
720P
SD
PsF
FC
60
50
30
25
24
1
Output signal format indicators
Note
1
3
2
4
SDI OUT
1
SDI OUT1, 2, 3, 4 connectors