Справочник Пользователя для Hunter Fan Type T Models

42747-01 • 09/21/07 • Hunter Fan Company

Plug 

Connector 

Detail

7-1.  To attach the upper switch housing, partially install two #6-32 x

3/8” housing assembly screws into the switch housing mounting 
plate.

7-2.  Align the keyhole slots in the housing with the housing assembly

screws. 

7-3.  Turn the housing counterclockwise until the housing assembly 

screws are firmly situated in the narrow end of the keyhole slots. 
Install the remaining #6-32 x 3/8” screw into the housing. Tighten
all three screws firmly.

   

 CAUTION:  Make sure the upper switch housing is securely attached 

to the switch housing mounting plate. Failure to properly attach and 
tighten all three assembly screws could result in the switch housing 
fixture falling.

7-4.  To attach the lower switch housing, connect the upper plug 

connector from the motor to the lower plug connector in the 
lower switch housing assembly.

    Note: Both plug connectors are polarized and will only fit together 

one way. Make sure the connectors are properly aligned before 
connecting them. Incorrect connection could cause improper 
operation and damage to the product. 

7-5.  Place the lower switch housing assembly over the upper switch 

housing. Align the side screw holes in the upper and lower switch
housings. Attach the lower switch housing to the upper switch
housing with three #6-32 x 3/8” housing assembly screws.

Housing

Assembly

Screw

Upper

Switch 

Housing

Housing

Assembly Screw

Lower Switch 

Housing