Справочник Пользователя для Hunter Fan Type T Models

42747-01 • 09/21/07 • Hunter Fan Company

5-1. Holding the canopy, raise the fan off the hook.
5-2. Align the slots in the canopy with the tabs on the ceiling plate.
5-3. Raise the canopy over the ceiling plate. Rotate the canopy

clockwise until the tabs on the ceiling plate totally engage with 
the slots in the canopy.

5-4.  Partially install the three canopy screws into the canopy one at a 

time. Once all three screws are in, tighten them.

5-5.  Using both hands, push the canopy trim ring up to the top of the

canopy. The canopy trim ring will snap and lock into place.

Should you need to remove the canopy 
trim ring, follow these steps:
  1.  Locate the tab indicators, small 

bumps on top of tabs.

  2.  Press firmly on opposite sides of the 

ring toward the canopy. The tabs will 
flex out releasing the trim ring from 
the canopy.

Canopy Trim 

Ring

Canopy

Ceiling Plate

Canopy 

Screw