Справочник Пользователя для Regency P33-LP4

Regency

®

 P33-4 Zero Clearance Direct Vent Gas Fireplace

35

1)   Before beginning the installation, remove the Glass Door from the 

unit. Refer  to  the manual for instructions.

2)  Slide the Bottom Faceplate Bracket into the bottom of the unit,  secure 

it into the pins located on the inside of the fi re box. Once the bracket 
is in place, tighten the screws into the hinges on the left and right 
sides.

4)   a)  Before attaching the Full Screen Door Frame to the unit, 

loosen the left and right side #8 Self Tapping Philips  screws 
located on the inside top of the outer frame of the appliance. 
Also remove the center screw.

 b) 

Slide the cut-outs in the Top and Bottom Flange of the Full 
Screen Door Frame under the screw heads which were 
loosened in step 4a). Once the Frame is in place, tighten the 
screws to secure. Also re-secure the top center screw through 
the oblong hole.

3)  Before attaching the Full Screen Door Frame, remove the Screen 

Doors from the Full Screen Door Frame by fully opening the doors 
and lifting up off of the hinges. See important note in step 10.

Pin location

Bottom Faceplate 
Bracket

Full Screen Door 
Frame

Faceplate 
Mounting 
Bracket

Screw