Справочник Пользователя для Samsung HTH5500

 - English

When you connect this product to a network, you 
can use network based applications and functions 
such as BD-LIVE and upgrade the product's software 
through the network connection.

To begin configuring your network connection, 
follow these steps:
1.  In the Home screen, select Settings, and then 

press the v button.

2.  Select Network, and then press the v button.
3.  Select Network Settings, and then press the v 

button.

4.  Go to the instructions for Wired networks 

starting below or the instructions for Wireless 
networks on the bottom right of this page.

 

Ğ

After following Steps 1 to 3 above:
1.  In the Network Settings screen, change 

Network Type to Wired. Then, select Connect 

and press the v button. The product detects 

the wired connection, verifies the network 
connection, and then connects to the network.

2.  When it is done, highlight Ok, and then press 

v button.

 

Ğ

If you have a static IP address or the automatic 
procedure does not work, you'll need to set the 
Network Settings values manually.
After following Steps 1 to 3 above:
1.  In the Network Settings screen, change 

Network Type to Wired. Then, select Connect 

and press the v button. 

The product searches for a network, and then 
displays the connection failed message.

 

✎

If it is possible to connect the home theater 
to your network wirelessly, select Change 
Network at this point, change the Network 
Type to Wireless, and then go to the 

instructions for wireless networks on the 
bottom right of this page.

Network Settings

MAC Address

XX:XX:XX:XX:XX:XX

IP Address

   0.   0.   0.   0

Subnet Mask

   0.   0.   0.   0

Gateway

   0.   0.   0.   0

DNS Server

   0.   0.   0.   0

a Previous      d Skip      < Move      " Select

IP auto setting failed. Try the following to set up IP automatically, or set up the IP manually by  
selecting 'IP Settings'.
- Ensure that DHCP server is enabled on the wireless network, and then unplug and re-plug the wireless 
network.
- Contact your Internet Service Provider for more information.

Wired network connection failed.

Change Network

IP Settings

Retry

Close

2.  Use the ◀▶ buttons to select Ip Settings, and 

then press the v button. The Ip Settings 

screen appears.

3.  Select the Ip Setting field, and then set it to 

Enter manually.

4.  Select a parameter to enter (Ip Address, for 

example), and then press v. Use the number 

keypad on your remote control to enter the 
numbers for the parameter. You can also enter 
numbers using the ▲▼ buttons. Use the ◀▶ 
buttons on the remote control to move from 
entry field to entry field within a parameter. 
When done with one parameter, press the v 

button.

5.  Press the ▲ or ▼ button to move to another 

parameter, and then enter the numbers for that 
parameter following the instructions in Step 4. 

6.  Repeat Steps 4 and 5 until you have filled in all 

parameters.

 

✎

You can get the network parameter values 
from your Internet provider.

7.  When finished entering all the parameter 

values, select Return ('), and then press the 
v button. The home theater verifies the 

network connection and then connects to the 
network.

You can set up a wireless network connection in 
three ways:

 

- Wireless Automatic

 

- Wireless Manual

 

- WPS(PBC)
Before you configure the wireless network 
connection, disconnect any wireless network devices 
currently connected to the product or, if applicable, 
the product's current wired connection.