Справочник Пользователя для Samsung HTH5500

 - English

 

✎

You can get the Network parameter values 
from your Internet provider.

11.  When finished, select Return ('), and then 

press the v button. The Security key screen 

appears.

12.  On the Security key screen, enter your 

network's Security Code or Pass Phrase. Enter 
numbers directly using the number buttons on 
your remote control. Enter letters by selecting 
a letter with the ▲▼◀▶ buttons, and then 
pressing the v button.

13.  When finished, select done at the right of the 

screen, and then press the v button. The 

product verifies the network connection and 
then connects to the network.

14.  After the home theater verifies the network, 

select Ok, and then press the v button.

 

✎

You can also begin the Manual Network setup 
by going to Settings > Network > Network 
Status.

 

Ğ

One of the easiest ways to set up the wireless 
network connection is using the WpS(pBC) function. 

If your wireless router has a WpS(pBC) button, 

follow these steps:
Follow the Steps 1 to 3 in "Configuring Your 
Network Connection". (See page 19)
1.  In the Network Settings screen, change 

Network Type to Wireless. The product searches 

for and then displays a list of the available 
networks.

2.  Scroll the list down, select WpS(pBC), and then 

press the v button.

3.  Press the WpS(pBC) button on your router 

within two minutes. Your product automatically 
acquires all the network settings values it 
needs and connects to your network after the 
network connection is verified.

4.  When it is done, highlight Ok, and then press 

the v button.

 

✎

For a WPS connection, set your wireless 
router’s security encryption to AES. WEP 
security encryption does not support a WPS 
connection.

The Wi-Fi direct function allows you to connect Wi-
Fi direct devices to the product and each other using 

a peer-to-peer network, without a wireless router.

 

✎

Some Wi-Fi direct devices may not support 
the DLNA function if connected via Wi-Fi 
direct. If this is the case, change the network 

connection method you used to connect the 
device to the home theater.

 

✎

Wi-Fi direct transmissions can interfere 
with Bluetooth signals. Before you use the 
Bluetooth function, we strongly recommend 

that you turn off the Wi-Fi direct function on 

any device in which it is currently on.

1.  Turn on the Wi-Fi direct device and activate its 

Wi-Fi direct function.

2.  In the Home screen, select Settings, and then 

press the v button.

3.  Select Network, and then press the v button.
4.  Select Wi-Fi direct, and then press the v 

button.  
The Wi-Fi direct devices that you can connect 

to appear.

Settings

Display
Audio

Network

System
Language
Security
General
Support

Wi-Fi Direct

Device Name : HT-H5500
Select your Wi-Fi Direct device to connect to.

AndroidXXXXXXX 

Not Connected

Close

Refresh

5.  You have three ways to complete the Wi-Fi 

connection:

 

Through the Wi-Fi device.

 

Through the product using PBC.

 

Through the product using a PIN.

Each is covered below.

1.  On the Wi-Fi device, follow the device's 

procedure for connecting to another Wi-Fi 
direct device. See the device's user manual for 

instructions.