Справочник Пользователя для Insignia NS-5HTV
18
Insignia NS-5HTV 5” Hand Held TV
www.insignia-products.com
3 Press the UP/DOWN buttons to highlight ATV Source, then press
ENTER repeatedly to select AIR, ATV CABLE-STD, ATV
CABLE-HRC, or ATV CABLE-IRC.
CABLE-HRC, or ATV CABLE-IRC.
4 Press the LEFT button twice to exit the Setup Menu.
Setting the menu transparency
To set the menu transparency:
1 Plug in your TV and turn it on by pressing the POWER button.
1 Plug in your TV and turn it on by pressing the POWER button.
2 Press the MENU button. The
Setup Menu opens.
3 Press the UP/DOWN buttons to highlight Transparent, then press
ENTER to toggle between On (transparent) and Off (opaque).
4 Press the LEFT button twice to exit the Setup Menu.
Improving reception
When the signal is weak, causing a poor or distorted picture, try
placing your TV near a window or connecting an external antenna to
the TV to improve reception.
placing your TV near a window or connecting an external antenna to
the TV to improve reception.
Connect the external antenna (not provided) to the RF IN jack on the
right side of the TV.
right side of the TV.
Using your TV as a monitor
To use your TV as a monitor:
1 Connect the AV cable from the AV OUT jacks (yellow plug to the
1 Connect the AV cable from the AV OUT jacks (yellow plug to the
Video jack, red plug to the right audio jack, and white plug to the
left audio jack) of the external signal source.
left audio jack) of the external signal source.
2 Connect the AV cable’s 1/8” plug to the AV IN jack of your TV.
3 Press INPUT button on the TV to switch to AV mode.