Справочник Пользователя для John Deere AC1-CG16H

Operator’s Manual  

engine will not start. 

various engine problems. 

Refer to the engine manual 

 

 

accompanying your unit.

noisy operation. 

Loose engine pulley or pump flywheel.  Tighten pulley and or flywheel.

 

Lack of oil in the pump.  

Add correct amount of oil. Check  

 

 

for bearing damage.

 

Carbon deposits on pistons or valves.  Remove cylinder head and inspect.   

 

 

Clean or replace.

 

Bearing, piston or connecting rod failure. STOP THE UNIT!  Contact John Deere  

 

 

customer service.

Air leaks at connections. 

Allow the unit to build pressure to the 

rapid pressure loss when the 

 

maximum allowed.  Turn off and brush 

a soapy water solution onto all 

 

 

connections.  Check connections for  

 

 

air bubbles. Tighten the connections  

 

 

where leaks are present.

 

Air leak in air tank. 

Air tank must be replaced.  Do not  

 

 

attempt to repair air tank!

 

Defective Pilot valve. 

Clean or replace.

Pressure Regulator not turned to 

Adjust Pressure Regulator to proper

high enough pressure or defective.  

setting or replace.

 

Restricted air intake. 

Clean or replace Air Intake Filter.

 

Air leaks or restrictions. 

Check for leaks and repair.

 

Hose or hose connections are too  

Replace with larger hose or  

 

 

small or long.  

connectors.

 

Slipping belt. 

Tighten or replace.

 

The unit is not large enough for air  

Check the accessory air requirement. 

 

requirement. 

If it is higher than the CFM or pressure 

 

 

supply to the air compressor, use a  

 

 

larger unit.

 

Restriction in Pilot valve. 

Clean or replace.