Справочник Пользователя для John Deere AC1-CG16H

Operator’s Manual  

5

MAINTENANCE

Read the instruction manual before performing maintenance. 

Keep all air vents clear. 

Keep the unit clean. 

DO NOT spray with water. 

Periodically check all fasteners and tighten, see the periodic 

maintenance chart.

The following procedures must be performed when stopping 

the unit for maintenance or service:

. Turn off the unit.  
. Disconnect spark plug wire from engine.
. Open all drains.
4. Wait for the unit to cool before starting service.
Maintenance Chart:

To ensure satisfactory operation over an extended period of time, an engine requires normal maintenance at regular 

intervals. The Periodic Maintenance Chart below shows periodic inspection and maintenance items and suitable intervals. 

The bullet mark designates that the corresponding item should be performed at that interval.

• The pump oil must be changed after the first 50 hours of  operation and every 200 hours or 3 months, whichever comes first.

•• The engine oil must be changed after the first 5 hours of operation and every 50 hours or 3 months, whichever comes first.

••• Service more frequently under dusty conditions.

Every  years, an Authorized John Deere Service Technician should check the safety valve, intake valves and delivery valves. 

Procedure

Check Pump Oil Level

x

Check Engine Oil Level

x

Oil Leak Inspection

x

Check Engine Air Filter

x

Drain Condensation in Air Tank (s)

x

Inspect Guards/Covers

x

Check for Unusual Noise/vibration

x

Check for Air Leaks

x

Check cylinder and head fins for dust and dirt

x

Check battery electrolyte level

x

Check fuel lines (replace if necessary)

x

Clean Exterior of Compressor

x

Inspect Air Filter

x

Inspect Belt

x

Check Safety Relief valve

x

Change engine oil (••)

x

Clean fuel filter

x

Clean dust and dirt from cylinder and cylinder head fins (•••)

x

Change Pump Oil (•)

x

Replace Air Filter

x

Check Engine Spark Plug

x

Add fuel stabilizer

x

Run unit dry

x