Справочник Пользователя для Q-Logic 3000
4–Hardware Installation
QLE3044 Installation
QLE3044 Installation
4-2
NE0154601-00 B
Ethernet Port Mapping
The mapping of port numbers on the QLE3044 is shown in
.
QLE3044 Status LEDs
The QLE3044 has two status LEDs per port. These LEDs are located on the port
itself, as shown in
itself, as shown in
. When viewing the QLE3044 from the front, the
bi-color green/orange link LED is on the left, and the green activity LED is on the
right.
right.
Figure 4-2. QLE3044 Status LEDs—Front View
The bi-color link LED indicates the speed of the connection as shown in
.
Table 4-1. Mapping of Port Number, PCI Function, and Ethernet
Interface
Port Number PCI Function
Ethernet Interface
1
0
Ethernet interface numbers are dynamically allo-
cated by the host. As such, any eth[n] interface can
be connected to any port.
cated by the host. As such, any eth[n] interface can
be connected to any port.
2
1
3
2
4
3
Table 4-2. QLE3044 LED Definitions
Speed
Green/Orange
Bi-Color Link
LED
Green Activity LED
10Mbps
Off
During power-up, the activity LED is on continu-
ously (solid). The LED blinks during normal opera-
tion when there is activity on the port for any of the
speed settings.
ously (solid). The LED blinks during normal opera-
tion when there is activity on the port for any of the
speed settings.
100Mbps
Green On
1000Mbps
Orange On
Port 1
Port 2
Port 3
Port 4
Top of board
Bi-color
Link LED
Green
Activity LED
PCIe connector