Справочник Пользователя для Q-Logic 3000

4–Hardware Installation
QLE3142 Installation

4-4

NE0154601-00  B

To install the QLE3142:

1.

Verify that the system is powered down and unplug the power cord.

2.

Remove the system cover.

3.

Locate an empty PCIe x8 slot.

4.

Remove the SFP+ optical modules from the QLE3142 if they are already 
inserted (see 

5.

Insert the QLE3142 into the PCIe x8 slot. Apply uniform pressure on top of 
the QLE3142 until it is firmly seated in the bus connector.

6.

Connect the SFP+ module or copper direct-attach twinax cable. Listen for an 
audible clicking sound when the optical module is inserted into the housing 
(see 

). 

7.

Secure the bracket to the chassis and replace the cover.

8.

Connect the appropriate cables to the QLE3142.

9.

Plug in the power cord and power up the system.

QLE3142

SFP+ module slides into

housing on the board.

Ensure hinge is in upright position

when inserting module.

SFP+ Optical 

To remove the optical module, flip the hinge

downward. Pull on the hinge to remove

the module from the housing.

Housing

Housing

Module

SFP+ Optical 

Module

Bracket