Справочник Пользователя для TP-LINK TD-W8961NB

 

 

54

Select IP/MAC Filter as the Filter type, and select MAC as the Rule type (shown in Figure 4-40), 

and then you can configure the filter rules based on MAC address. 

 

Figure 4-40 

 If you select Next, the modem router will find the 

the information about the MAC Filter rules. 

 Presume the rules are 

 (1, 2). 

Step 1:  Select the “IP/MAC Filter” as the Filter Type Selection:   



  Rule Type: Select MAC for the MAC Filter rule. 



  Active: Select “Yes” to make the rule to take effect. 



  MAC Address: Enter the MAC address for the rule. 



  Rule Unmatched: If the current rule can not match, and you select Forward, the modem 

router will skip the rule and transmit directly.
next filter rule (show in Filter list) to match. 



  IP/MAC Filter Listing: This displays 

For example: If you want to block the PCs with MAC addresses 00:0A:EB:00:07:BE and 
00:0A:EB:00:07:5F to access the Internet, you can configure as follows.
both aimed at the interface PVC0, and their indexes are (1, 1) and