Справочник Пользователя для Ingersoll-Rand 4581740

18 

04581740_ed2

The Setup menu and its sub-menus are used to program tightening strategies and to set a broad variety of important 

system parameters. Basic tightening strategies are created in the Setup menu. In addition to strategies, you can 

use the Setup menu to set many basic system parameters, such as time, display language, measurement units, 

and communications protocols. The Setup menu is also used to create passwords for controlling access to Insight’s 

software and data records. There are five different sub-menus under the Setup menu: 1. Quick Setup, 2. System 

Setup, 3. Spindle Setup, 4. Serial Setup, 5. Ethernet Setup, and 6. PLUS Setup (provided user is using the PLUS 

communications protocol). The following sections covers each of these sub-menus in detail.

Figure 15 - Setup Menu

The first step in programming the Insight to operate for your requirements, is to select the language that is used in the 

graphical display. Language is selected by going to the Setup menu’s System Setup screen. The Language parameter 

is the eighth item listed on this screen. Push the expand button to select the language you wish to use while operating 

the Insight IC-D. The default language is English.

Figure 16 - Language Selection

This menu screen is used to get you up and running quickly. Single-step torque control and angle control fastening 

strategies can be set up from this screen. Only basic fastening parameters are displayed with this screen. If a more 

complex, multi-step strategy or other strategies are needed--such as yield or drag torque--they can be programmed 

through the ICS software. Only the first eight Configurations can be viewed and programmed from the controller. The 

ICS software allows you set up a maximum of 256 Configurations. 

The Quick Setup screen allows you to set key parameters for your tightening strategy. You may pre-program up to 

eight separate tightening operations. These are called Configurations. The parameters displayed on the screen vary, 

depending upon the fastening strategy selected.