Справочник Пользователя для Ingersoll-Rand 4581740

04581740_ed2 

37

To access and use Tool Test:

1.  Press the Diag button on the Insight controller.
2.  On the Diagnostics menu, select Tool Test and press Enter.
3.  A pop-up message warns you that running the test interrupts spindle operations. Press Enter to continue.

4.  For a fixtured spindle, use the arrow keys to the Start Tool button and press Enter to run the spindle. Press Enter 

again to stop the spindle. 

5.  If you are running the test with a handheld spindle, press the throttle as necessary to view the Speed, Torque, and 

Angle results.

6.  To run the Lamp Test, use the arrow keys to move the to the radio button next to the lamp ON icon and press Enter. 
7.  To turn the Lamp Test off, move to the radio button next to the lamp OFF icon and press Enter.
8.  To change the direction to CW or CCW, move to the radio button for the direction you want and press Enter.

Although the Event Log cannot be viewed on the IC-D display, all major events are recorded, and the log may be 

accessed through the ICS software. 

The Event Log records the date and time that certain important Insight events occur. The events recorded include 

hardware and software faults (such as a spindle over-temperature event) and significant user actions (such as changes to 

a spindle’s transducer range or angle constant). This record of significant events can help in troubleshooting problems.