Справочник Пользователя для Smeg ALFA41XE2

The program with delayed pre-heating is set as follows:

•  Turn the knob to the 

 or 

 symbols to select the program “P39”.

•  Press the “PUSH” button for at least 3 seconds; the display shows the

current hour flashing.

•  Turn the knob to the 

 or 

 symbols to set the current hour.

• Press 

the 

“PUSH” button; the display will show the minutes flashing.

•  Turn the knob to the 

 or 

 symbols to set the minutes.

• Press 

the 

“PUSH” button; the display will show the temperature

flashing.

•  Turn the knob to the 

 or 

 symbols to set the temperature.

•  Press the “PUSH” button; the display will show the cooking start hour

flashing.

•  Turn the knob to the 

 or 

 symbols to set the cooking start hour.

• Press 

the 

“PUSH” button; the display will show the minutes flashing.

•  Turn the knob to the 

 or 

 symbols to set the minutes.

•  Press the “PUSH” button to exit from the data setting and saving

phase. The text “PEnd” appears on the display and after 3 seconds it
will display P39, the temperature and the pre-heating start time in
succession.

•  To start the program press the “START” button for at least 2 seconds.

The display will show the current time and “P39A” in succession until
the program is activated at the set time.

The oven will perform preheating at the set time; during this phase the
display shows “P39”, the text “InF” and the set temperature in
succession; this will continue until interrupted by the “STOP” button.
The program must be activated every day. To reactivate it press the
“START” button for at least 2 seconds.