Справочник Пользователя для Smeg ALFA41XE2

From the “OFF” status proceed as follows:

•  Turn the knob to the 

 or 

 symbols to select one of the available

programs from P01 to P38. The display will show the parameters of
the selected program in rotation.

•  To start the program press the “START” button. The appliance will

perform a preheating cycle, showing the message “PrEh” on the
display.

•  When preheating is finished, a series of beeps lasting 3 seconds

indicate that is possible to proceed with the cooking operation. The
message “PrEh” will flash on the display.

•  To start the cooking, keep the “START” button pressed for 2 seconds.

The display will show, in order, the temperature set, the time
remaining until the end of cooking and the program selected.

•  It is possible to start the cooking early before the preheating

temperature is reached, by keeping the “START” button pressed for 3
seconds.

•  During the last minute of cooking, only the countdown of the

remaining 60 seconds will be displayed. At the end, a beep and the
text “End” flashing (for 20 minutes) will indicate that the cooking has
been completed.

•  To return to the “OFF” status keep the “STOP” button pressed for 4

seconds.

When a cooking operation finishes, it is possible to extend it manually:

•  While the display is showing the message “End”, press the “START”

button; the text “tP00” will appear on the display.

•  Turn the knob to the 

 or 

 symbols to set the additional minutes of

cooking; at most 20 extra minutes are allowed.

•  To start cooking with the extra time that has just been set, press the

“START” button for at least 2 seconds.

•  At the end of cooking, the text “End” will continue to flash for the next

20 minutes and the oven light will remain on.