Руководство Пользователя для Hoshizaki rf28a

This unit is preset at the factory to defrost every 6 hours for general conditions, the first 
defrost occurring 6 hours after power to the unit is turned on. Note that the defrost is 
a heated defrost, and therefore will have a tendency to raise the cabinet temperature. 
Cabinet temperature is not displayed during defrost; "dF" is displayed in its place. Defrost 
may be initiated manually by holding down the MANUAL DEFROST button for 5 seconds.

The factory setting is °F. To change the display to °C, follow the steps below.

1) Press and hold both the

 button and the 

 service button for 5 seconds. "F0" should 

appear in the display window. Press the MANUAL DEFROST button until "F5" appears 
in the display window.

2) Press the 

 service button to display the current setting (default: "°F"). Press the 

 up or 

 down button to switch to °C. Press the 

 service button again to save the 

setting.

3) Press and hold both the 

 button and the 

 service button for 5 seconds. The cabinet 

temperature will be displayed using the newly saved temperature scale.

4) Affix the "°C" label supplied with the unit to the display panel, covering "°F" but not the 

display window.

Note: The cabinet temperature is updated every 30 seconds.

1) Before shutting down the unit, move the stored food into another refrigerator/freezer.
2) Unplug the unit.
3) When preparing the unit for long storage, clean the cabinet interior and door gaskets, 

dry them thoroughly and store the unit in a dry place.

The door locks (1 lock per door) are located beside the door handle. To lock the door, 
push and turn the key.

10