Руководство Пользователя для Quantum fc230

ATL P-Series Library User’s Guide Addendum - Prism FC230 Router

6331121-03, Ver. 3, Rel. 2

August 2002

Fibre Channel Services Command List

11

Fibre Channel Services Command List

0

This section provides a list of currently available Fibre Channel 

Services Software commands. Most commands are available for both 

the FC230 and FC310 bridges; shaded commands are supported by the 

FC230 bridge only.

AddressMap

Sets the current operating mode of 
the FC ports

A

set addressmap [A | B [1 | 2]]
get addressmap

AutoMap (Immediate) Automatically maps all currently 

operational SCSI devices attached to 
the Fibre Channel bridge across 1, 2, 
and all 3 ports, as defined by the 
user. 

automap < [fp] | [fp [fp]] | [fp  [fp [fp]]] >

(Typing automap by itself distributes maps 
across all 3 ports.)

BootFibreDelay

Sets the time in seconds for the Fibre 
Channel bridge to wait before 
announcing its presence to the Fibre 
switch.

30

set bootfibredelay [0 | 15 | 30]
get bootfibredelay

BootScanPorts

Used to specify which FC port 
should be used to assign devices 
within a boot scan.

Addressmap B (port failover) 
overrides this command.

Auto

set bootscanports [fp [fp [fp]]] | [all] | [auto]
get bootscanports

[all] indicates that all ports will be used. 
[auto] indicates that the FC bridge should 
detect which ports are in use.

ClearEvent 
(Immediate)

Clears the contents of the event log.

clearevent

DisplayEvent 
(Immediate)

Displays the contents of the event 
log. The log is filtered by the current 
switch settings as described in the 
DispEvent section. 

displayevent < all >

 < all > causes the display filtering to be 
temporarily suspended and all logged events 
to be displayed.