Руководство Пользователя для Sony PDW-F330L
65
Recording – Basic Operations
Chapt
er
3
Rec
o
rd
ing and
P
la
y
bac
k
When setting the shutter speed while the shutter mode is
set to ECS or SLS, the setting of shutter speed takes
priority (see page 63). To change the reference value,
make sure the camcorder is not in the process of setting the
shutter speed.
Check that the slow & quick-motion function is off.
set to ECS or SLS, the setting of shutter speed takes
priority (see page 63). To change the reference value,
make sure the camcorder is not in the process of setting the
shutter speed.
Check that the slow & quick-motion function is off.
Proceed as follows.
(How to select an item in the menu screen: Turn the
MENU knob to move the
(How to select an item in the menu screen: Turn the
MENU knob to move the
b mark to the desired item.)
1
For details on menu operations, see “Basic Menu
Operations” on page 131.
Operations” on page 131.
2
Select IRIS OVERRIDE, and press the MENU knob.
3
Turn the MENU knob to select ON, and press the
MENU knob.
MENU knob.
This enables the function that adjusts the reference
value during shooting. You can adjust the value by
simply turning the MENU knob.
Leaving the MENU knob in the current position for a
few seconds sets the reference value.
value during shooting. You can adjust the value by
simply turning the MENU knob.
Leaving the MENU knob in the current position for a
few seconds sets the reference value.
When the RM-B150/B750 Remote Control Unit is
connected
The IRIS control knob of the RM-B150/B750 can be used
for lens iris setting. In this case, the bar display (s) does
not appear.
connected
The IRIS control knob of the RM-B150/B750 can be used
for lens iris setting. In this case, the bar display (s) does
not appear.
To adjust the iris sensitivity
When you use the VCL-719BXS lens (supplied with
PDW-F330K), you usually need not adjust the iris
sensitivity because lenses are equipped with iris sensitivity
adjustment function.
In auto iris mode, if hunting or response delay happens,
adjust the iris sensitivity using the iris sensitivity trimmer.
PDW-F330K), you usually need not adjust the iris
sensitivity because lenses are equipped with iris sensitivity
adjustment function.
In auto iris mode, if hunting or response delay happens,
adjust the iris sensitivity using the iris sensitivity trimmer.
Example for the lens (VCL-719BXS) supplied with
the PDW-F330K:
the PDW-F330K:
You can see the iris sensitivity trimmer when removing the
rubber cap on the front of the lens driving unit. Use a mini-
screwdriver to turn the trimmer. If you turn it clockwise,
the sensitivity increases, and if you turn it
counterclockwise, the sensitivity decreases.
It is recommended that you confirm the iris sensitivity
after replacing the lens.
rubber cap on the front of the lens driving unit. Use a mini-
screwdriver to turn the trimmer. If you turn it clockwise,
the sensitivity increases, and if you turn it
counterclockwise, the sensitivity decreases.
It is recommended that you confirm the iris sensitivity
after replacing the lens.
For more information, refer to the operating instructions
for the lens (or consult the lens maker).
for the lens (or consult the lens maker).
Adjusting the Audio Level
Setting the AUDIO SELECT (CH-1/CH-2) switches to
AUTO automatically adjusts the input levels of the audio
signal to be recorded in audio channels 1 and 2.
AUTO automatically adjusts the input levels of the audio
signal to be recorded in audio channels 1 and 2.
To manually adjust the levels of the audio
inputs from the AUDIO IN CH-1/CH-2
connectors
inputs from the AUDIO IN CH-1/CH-2
connectors
Proceed as follows to adjust the levels of the audio inputs
from the AUDIO IN CH-1/CH-2 connectors, which are to
be recorded in audio channels 1 and 2.
from the AUDIO IN CH-1/CH-2 connectors, which are to
be recorded in audio channels 1 and 2.
Note
Iris sensitivity trimmer (S or IRIS GAIN is indicated.)
AUTO
CH-1
MANUAL
AUDIO SELECT
AUDIO LEVEL
0
10
0
10
CH-2
3
2
3