Справочник Пользователя для Sony pdw-f335l

41

Preparing the Audio Input System

  Cha

p

te

r 2  

P

repa

ra

ti

ons

Loosen the screw and open the microphone holder 
clamp.

Place the microphone in the microphone holder.

Plug the microphone cable into the MIC IN connector, 
then set the AUDIO IN switch for the channel on 
which you want to record the audio from this 
microphone to FRONT (for CH-1/CH-2) or F (for CH-
3/CH-4).

You can use the supplied microphone detached from the 
camcorder.

When using the supplied microphone with an extension 
cable, always use an external power supply type cable.

You can connect up to two external monaural microphones 
to the AUDIO IN CH-1/CH-2 connectors, using a CAC-12 
Microphone Holder (not supplied).
The following is the procedure for attaching an electret 
condenser microphone such as the ECM-673/674/678.

Remove the fixing screws for external microphone 
holder.

Attach the CAC-12 Microphone Holder.

Clamp of the microphone holder

Place the microphone in the 
holder so that “UP” is at the top.

Tighten the screw.

Close the microphone holder.

Connect to the MIC IN connector.

AUDIO IN (CH-1/CH-2) switches
Set the AUDIO IN switch for the 
channel on which you want to record 
the audio to FRONT (for CH-1/CH-2) or 
F (for CH-3/CH-4).

Connect to the MIC IN connector.

CAC-12

Screws removed in step 1