Инструкции Пользователя для Standard Horizon CP1000C

  

FF520

Page 21

the ShuttlePoint Knob to select the Chart page and press [ENTER] or move the ShuttlePoint knob

to select the Chart page.

3.1.2b The ENTER key

1. Pressing [ENTER] when a Fish Finder page is displayed, will show the Sensitivity Menu.

Figure 3.1.2b - The ENTER key, Sensitivity Menu

3.1.2c The CLEAR key

1. Pressing [CLEAR] hides the Variable Depth Marker (VDM).
2. Pressing [CLEAR] in ZOOM mode with AUTORANGE enabled, selects the BOTTOM

FOLLOWING mode. In such mode the ZOOMED view automatically follows the bottom
contour to keep it always displayed in the lower half of the screen.

3.1.2d The ZOOM IN and ZOOM OUT keys

Pressing [ZOOM IN] when any of the Fish Finder displays are shown, allows the page to
be zoomed into 2X or 4X the normal display.
Move the ShuttlePoint knob up or down to move the VDM to the area you wish to zoom into.
Press [ZOOM IN] once, and 2X will be shown in the bottom left corner of the display.
Pressing [ZOOM IN] again switches to 4X and again to normal operation.
Pressing [ZOOM OUT] switches from 4X to 2X and vice versa.

3.1.2e The MARK key

Pressing [MARK] when any of the Fish Finder displays are shown, place a mark on the chart
page on the boat position.

3.1.2f The SHUTTLEPOINT knob

Moving up or down the ShuttlePoint knob when any of the Fish Finder displays are shown,
move the VRM up and down.

3.1.2g Controls on Chart page or Fish page in Chart/Fish dual mode

When the GPS chartplotters is in the Chart/Fish display mode, it is possible to move the
control between the Chart and the Fish: