Дополнительное Руководство для Standard Horizon CP1000C

  

ADDENDUM

Page 7

CAUTION

Do not remove the C-Map MAX software update card until step 7 is completed.

NOTE

The screen will be blank for about 40 seconds then a Internal WWB chart upload status screen will

be shown. On this screen you will notice the GPS chartplotter will erase the old WWB ground area,

write the new background to the GPS chartplotter, and verify the data has been loaded correctly.

5. After the software upgrade is finished the GPS chartplotter will show a message "Press

ENTER  key to continue". Press  [ENTER]  and the GPS chartplotter will restart by
showing the startup screen.

6. Remove the C-Map MAX software update card and replace with C-Map data card.
7. Select the Chart page, press [MENU] and confirm MAX Functions is shown in the menu.

NOTE

DURING NORMAL OPERATIONS THE C-CARD SHOULD NOT BE REMOVED

DURING NORMAL OPERATIONS THE C-CARD SHOULD NOT BE REMOVED

DURING NORMAL OPERATIONS THE C-CARD SHOULD NOT BE REMOVED

DURING NORMAL OPERATIONS THE C-CARD SHOULD NOT BE REMOVED

DURING NORMAL OPERATIONS THE C-CARD SHOULD NOT BE REMOVED

SINCE THE UNIT MAY LOCK  UP

SINCE THE UNIT MAY LOCK  UP

SINCE THE UNIT MAY LOCK  UP

SINCE THE UNIT MAY LOCK  UP

SINCE THE UNIT MAY LOCK  UP