Дополнительное Руководство для Standard Horizon CP1000C
Page 8
ADDENDUM
3. MAP FUNCTIONS
A new menu item, the MAX FUNCTIONS menu, has been added into the MAIN MENU and
a new MAP CONFIGURATIONS Menu has been added to the Setup Menu.
a new MAP CONFIGURATIONS Menu has been added to the Setup Menu.
3.0
NEW MAX FUNCTIONS MENU
1. Press [MENU]. Move the ShuttlePoint knob to highlight MAX FUNCTIONS and press
[ENTER] or move the ShuttlePoint knob to the right. The new MAX Functions menu
appears on the screen:
appears on the screen:
Figure 3.0 - Map Functions Menu
The available Functions are described in the following.
3.0.0 Zoom Type
Allows more expansions or compression of the chart scale while zooming in or out. Zoom
Mode has two options; STANDARD (default) or FLEXI-ZOOM. When in FLEXI-ZOOM
mode, a short [ZOOM...] push causes a change of chart, whilst a long [ZOOM...] push
(press and hold) causes a pop-up window to be displayed on a corner of the screen. The
window shows the current Zoom Factor. By pressing [ZOOM IN]/[ZOOM OUT] the map is
expanded or compressed according to the zoom factor selected. The Window is automat-
ically closed if [ZOOM...] is not pressed for 2 seconds and the selected zoom factor will be
used at the next zoom in/out.
Mode has two options; STANDARD (default) or FLEXI-ZOOM. When in FLEXI-ZOOM
mode, a short [ZOOM...] push causes a change of chart, whilst a long [ZOOM...] push
(press and hold) causes a pop-up window to be displayed on a corner of the screen. The
window shows the current Zoom Factor. By pressing [ZOOM IN]/[ZOOM OUT] the map is
expanded or compressed according to the zoom factor selected. The Window is automat-
ically closed if [ZOOM...] is not pressed for 2 seconds and the selected zoom factor will be
used at the next zoom in/out.
To activate this function follow the procedure:
1. Press [MENU]. Move the ShuttlePoint knob to highlight MAX FUNCTIONS and press
1. Press [MENU]. Move the ShuttlePoint knob to highlight MAX FUNCTIONS and press
[ENTER] or move the ShuttlePoint knob to the right.
2. Move the ShuttlePoint knob to highlight ZOOM TYPE and press [ENTER] or move the
ShuttlePoint knob to the right.
3. The menu now shows two selections, STANDARD or FLEXI-ZOOM.
4. Move the ShuttlePoint knob to select the selection and press [ENTER].
5. Press [CLEAR] until the menu disappears or an easier method is to press the
4. Move the ShuttlePoint knob to select the selection and press [ENTER].
5. Press [CLEAR] until the menu disappears or an easier method is to press the
ShuttlePoint knob to the left a few times.
3.0.1 Fonts & Symbols (for CP1000C only)
On MAX charts it is possible to set the size of all names and symbols drawn on the charts,
selecting between Normal size (the regular characters size) and Large size.
selecting between Normal size (the regular characters size) and Large size.