Справочник Пользователя для Zanussi ZDT16030FA

1. Open the water tap.

2. Press the on/off button to activate the

appliance.

Make sure that the appliance is in programme

selection mode.

• If the salt indicator is on, fill the salt

container.

• If the rinse aid indicator is on, fill the rinse

aid dispenser.

• Make sure that there is rinse aid in the rinse

aid dispenser.

3. Load the baskets.

4. Add the detergent.

5. Set and start the correct programme for the

type of load and the degree of soil.

30

30

If the programme has a prewash phase, put a small quantity of detergent on the inner part of the appliance

door.

30

30

• Do not fill the salt container and the rinse aid dispenser.

• Adjust the water softener to the lowest level.

• Set the rinse aid dispenser to the lowest position.

THE AUTO OFF FUNCTION
This function decreases energy consumption by deactivating automatically the appliance when it is not

operating.
The function comes into operation:

• 5 minutes after the completion of the programme.

• After 5 minutes if the programme has not started.