Справочник Пользователя для Samsung WW4500 AddWash Pesukone, 7 kg

English 31

Operations

Control panel

01 Cycle Selector

Turn the dial to select a cycle.

02 Display

The display shows current cycle information and estimated time
remaining, or an information code when a problem occurs.

03 Temp.

Press to change the water temperature for the current cycle.

04 Spin

Press to change the spinning speed for the current cycle. The
revolutions per minute (RPM) differs with the model.
• Rinse Hold

: The final rinse process is suspended so that

the laundry remains in the water. To unload the laundry, run a
drain or spin process.

• No Spin : The drum does not rotate after the final drain

process.

• Spin Only : To run the Spin Only cycle, press Spin for 3

seconds. When the cycle time and spinning speed appear, press

Spin repeatedly until a desired spinning speed is selected.

Then, press Start/Pause to start the cycle. The spinning time
depends on the selected cycle.

05 Options

Press to select an option from Intensive, Pre Wash, and Rinse+.
Press again to deselect.
• Availability of the options depends on the cycle.

06 Delay End

Delay End lets you set the end time of the current cycle. Based
on your settings, the start time of the cycle will be determined
by the machine’s internal logic. For example, this setting is useful
for programming your machine to finish a wash at the time you
normally return home from work.
• Press to choose a preset unit of hours.

Operations

WW4500K-03734F-00_EN.indd 31

8/3/2016 5:31:33 PM