Справочник Пользователя для Sony PDW-F335KL

Скачать
Страница из 188
61
Recording – Basic Operations
  Chapt
er
 3
  Rec
o
rd
ing and
 P
la
y
bac
k
To adjust manually the level of audio channel 1 
without using the AUDIO LEVEL knob on the 
front of the camcorder
Set AUDIO CH1 LEVEL to SIDE1 on the AUDIO-1 page 
of the MAINTENANCE menu.
The setting of the AUDIO LEVEL knob on the front of the 
camcorder is disabled.
Setting the Time Data
To set the timecode
The timecode setting range is from 00:00:00:00 to 
23:59:59:29 (hours: minutes: seconds: frames).
(When the frame frequency is 23.98P: from 00:00:00:00 to 
23:59:59:23)
1
Press the DISPLAY/EXPAND button of the LCD 
monitor so that the status display appears.
2
Press the COUNTER/CHAPTER button of the LCD 
monitor to display TCG on the time counter display 
section.
3
Set the PRESET/REGEN/CLOCK switch to PRESET.
4
Set the F-RUN/SET/R-RUN switch to SET.
The first (leftmost) digit of timecode flashes.
5
Use the SEL/SET button (four-way arrow key) to set 
the timecode value including the last (rightmost) digit 
of the timecode.
To reset the timecode value to 00:00:00:00, press the 
RESET button on the right side of the LCD monitor.
When the frame frequency of this unit is 23.98P, a 
timecode frame count can only be set to a multiple of 
4 (0, 4, 8, 12, 16, or 20).
6
Set the F-RUN/SET/R-RUN switch to the desired 
operating mode for the timecode generator.
F-RUN: Free run. The timecode generator keeps 
running.
R-RUN: Recording run. The timecode generator runs 
only while recording.
To set the DF (drop-frame)/NDF (non-drop-frame) 
mode
You can select the drop-frame (DF) mode or non-drop- 
frame (NDF) mode on the TIME CODE page of the 
MAINTENANCE menu.
When the frame frequency of this unit is 23.98P, recorded 
timecode is always non-drop-frame (NDF).
To make the timecode consecutive
When the F-RUN/SET/R-RUN switch is set to R-RUN, 
recording a number of scenes to the disc normally 
produces consecutive timecode. However, once you 
remove the disc and record to another disc, the timecode 
will no longer be contiguous even when you use again the 
original disc for recording. 
In this case, by setting the PRESET/REGEN/CLOCK 
switch to REGEN, the timecode can be made continuous.
To save the actual time in the timecode
Setting the PRESET/REGEN/CLOCK switch to CLOCK 
saves the actual time in the timecode. When it is necessary 
to set the actual time, use the TIME/DATE page of the 
OPERATION menu.
When the frame frequency of this unit is 23.98P, the 
recorded timecode does not coincide with real time.
These bars turn on.
Normal input level
Excessive input level
All bars turn on.
PRESET
F-RUN
REGEN
SET
CLOCK
R-RUN
SUB CLIP
CLIP MENU
SEL/SET
1 2
3
5
4,6
Note
Note
Note