Справочник Пользователя для SMSC LAN9500i
Hi-Speed USB 2.0 to 10/100 Ethernet Controller
Datasheet
Revision 1.7 (10-02-08)
42
SMSC LAN9500/LAN9500i
DATASHEET
Chapter 6 Revision History
Table 6.1 Customer Revision History
REVISION LEVEL
AND DATE
SECTION/FIGURE/ENTRY
CORRECTION
Rev. 1.6
(09-09-08)
All
Fixed various typos
Fixed typos in example
Fixed typos in example
Added note to GPIO8, GPIO9, and GPIO10 stating
“By default this pin is configured as a GPIO”
“By default this pin is configured as a GPIO”
Rev. 1.5
(08-27-08)
All
Fixed various typos
Input leakage and input capacitance values added
for IS and IS_5V buffer types.
for IS and IS_5V buffer types.
Added note to EEP_SIZE pin definition: “A 3-wire
style 1K/2K/4K EEPROM that is organized for 128
x 8-bit or 256/512 x 8-bit operation must be used.”
style 1K/2K/4K EEPROM that is organized for 128
x 8-bit or 256/512 x 8-bit operation must be used.”
EEPROM Controller section added.
Rev. 1.3
(06-30-08)
Added SUSPEND0 and SUSPEND1 power
consumption tables. Reformatted all power
consumption tables and added typical values,
except for customer evaluation board, for which
maximum value was specified.
consumption tables. Reformatted all power
consumption tables and added typical values,
except for customer evaluation board, for which
maximum value was specified.
Rev. 1.2
(06-18-08)
Added IS buffer type to following pins when
operating in Internal PHY Mode: RXER, TXEN,
RXDV, RXCLK, CRS, COL, MDIO, MDC, TXD3,
TXD2, TXD1, TXD0, TXCLK.
operating in Internal PHY Mode: RXER, TXEN,
RXDV, RXCLK, CRS, COL, MDIO, MDC, TXD3,
TXD2, TXD1, TXD0, TXCLK.
Added PD buffer type to following pins when
operating in Internal PHY Mode: TXEN, RXDV,
COL, MDIO, MDC, TXD3, TXD2, TXD1, TXD0,
TXCLK.
operating in Internal PHY Mode: TXEN, RXDV,
COL, MDIO, MDC, TXD3, TXD2, TXD1, TXD0,
TXCLK.
Changed buffer type from PU to PD for following
pins: TXD2 (Internal PHY Mode), TXD1 (Internal
PHY Mode), TXD0 (Internal PHY Mode).
pins: TXD2 (Internal PHY Mode), TXD1 (Internal
PHY Mode), TXD0 (Internal PHY Mode).
Changed buffer type from PD to PU for following
pins: TXD3 (External PHY Mode).
pins: TXD3 (External PHY Mode).
Rev. 1.2
(06-16-08)
Changed ESR value from 30 ohms max to 50
ohms max.
ohms max.
Rev. 1.2
(06-10-08)
Changed pin 33 from “NC” to “TEST3”
Reduced pin count to one. Removed hidden
TESTMODE entry from the table.
TESTMODE entry from the table.