Справочник Пользователя для Q-Logic 3000

B–Flash Update
Flash Update Options

B-2

NE0154601-00  C

Type the following command, where “Local Area Connection n” specifies 

the adapter being Flashed:

nxflash -i “Local Area Connection n” --all 

(the quotes are required)

You are prompted to answer Y(es) or N(o) to allow the upgrading of the Flash to 
continue. Press the Y key to continue.

 for more 

information.

Type the following command, where [n] indicates the port number of the QLogic 

adapter (0, 1, 2, etc.):

./nxflash -i [n] --all

 for more information.

To install the NX Live CD:

1.

Download the QLogic Live ISO image file from the QLogic Web site, 

2.

Burn the ISO image onto a CD writable media (make sure your system has a 
CD burner).

3.

Insert the NX Live CD into the system that contains the QLogic adapter.

4.

Change any BIOS settings to permit the CD to boot before the other devices 
on the system.

5.

Boot the system from the CD.

6.

Use the menu options (see 

) to show 

current board information, update the firmware, or reboot the system 
(remember to remove the NX Live CD if you need to revert back to the 
operating system (OS) on the hard disk).

Refer to the support page on the on QLogic Web site for more information on 
downloading the NX Live CD.

To install the NX Live USB:

1.

Download the NX Live USB zip image file from the QLogic Web site, 

2.

Insert a USB Flash device in a USB slot.