Справочник Пользователя для Q-Logic 3000

B–Flash Update
QLogic Adapter Flash Update—Windows Server

B-4

NE0154601-00  C

When invoking the nxflash.exe utility, use the following syntax:

nxflash -i “Local Area Connection n” --all

In this command, the -i indicates the interface command and the “Local Area 
Connection n” specifies the adapter being Flashed. (The quotation marks are 

required.) 
To determine the adapter number: 
1.

Click the Start button, and then right-click My Network Places.

2.

Click Properties. The Network Connections window opens.

The Network Connections window lists all of the adapters and the type of device 
to which they are connected. 
Along with the interface (-i in the nxflash command syntax), additional 

commands are listed in 

. 

-i

--interface

Interface

This command specifies the interface type 
(Local Area Connection 1, Local Area Con-
nection 2, etc.).

--info

Information

This command displays adapter information 
such as adapter type, chip revision, serial 
ID, firmware version, BIOS version, MAC 
address, etc.

-a

--all

Flash 
update

This command performs a complete update 
of the BIOS and the firmware.

-a <image file>

--all <image file>

Flash 
update

This command performs a complete update 
of the BIOS and the firmware using a 
user-renamed ROM image.

-r <backup file>

--restore <backup 

file>

Restore

When an update is performed, the previous 
Flash version is stored to a file in the current 
working directory. Executing this command 
restores the specified backup Flash version 
to the QLogic adapter. Here is an example of 
a backup file name:

flashbackup_[serial num-
ber]_[version]_[date-time]

--pxe-on

PXE

This command enables PXE (default).