Техническая Спецификация для Meilhaus Electronic Mile House El.MML USB MEAS/switch RedLab® 1008
Модели
RedLab® 1008
miniLAB 1008 User's Guide
Getting Started with TracerDAQ
Use this dialog to set up the miniLAB 1008 as the data source used by the strip chart.
Selecting the channels to use for data
For this exercise, you are going select channels 0 and 3 as the data source you want to
acquire and plot. For each channel, you can configure the following options:
acquire and plot. For each channel, you can configure the following options:
the A/D range of data to acquire
the name that appears on the strip chart legend to identify the data
the plot line to use for the data
To configure these options, do the following
Configuring channel 0
To configure the miniLAB 1008's channel 0 as part of the data source to acquire and
plot, follow the steps below.
plot, follow the steps below.
1. Click to select the first
Enabled
check box. This enables a plot line to show on the
strip chart.
3-3