Техническая Спецификация для Intel D2500 DF8064101055400

Модели
DF8064101055400
Скачать
Страница из 122
Datasheet - Volume 1 of 2
11
1.3
Direct Media Interface Features
Compliant to Direct Media Interface (DMI)
Support 2 lanes in each direction for N2000 series processor and 4 lanes in each 
direction for D2000 series, Gen1 (2.5 Gbps) per lane per direction, point-to-point 
DMI interface to Intel® NM10 Express Chipset or PCH respectively.
The N2000 series processor can only work on boards that have a DMI x2 
connection. It will not work on a board with a DMI x4 connection. While the D2000 
series processor can only work on the boards have a DMI x4 connection.
100 MHz reference.
Support 64 bit downstream address (only 36-bit addressable from CPU)
Support APIC messaging support. Will send Intel-defined “End of Interrupt” 
broadcast message when initiated by CPU.
Support messaging in both directions, including Intel-Vendor specific messages.
Support Message Signal Interrupt (MSI) messages.
Support Power Management state change messages.
Support SMI, SCI and SERR error indication.
Support PCI INTA interrupt from CHAP Counters device and Integrated Graphics.
Support Intel® NM10 Express Chipset with on board hybrid AC-DC coupling 
solution.
Support polarity inversion (However, NM10 does not support)
1.4
Graphics Processing Unit Features
Support Directx*9 compliant Pixel Shader* v3.0 and OGL 3.0
640 MHz (D2550, D2700 & N2800/N2850) and 400 MHz (D2500 & N2600/N2650) 
graphic core frequency
200 MHz render clock frequency
Seven display planes, Display Plane A, B, Display Sprite C (can be connected to 
either pipes), Display OV (can be connected to either pipes), Cursor A, Cursor B, 
and VGA
Two display pipes, Pipe A and B support the dual independent displays
Max Pixel Clock: SC LVDS: 112 MHz, 18bpp (N2000 series) & 18bpp and 24bpp 
(D2000 series); DDI: 2x 4, 1.62GHz, 2.7GHz; VGA: up to 350MHz
Display Ports: eDP/DP x4, HDMI, LVDS (single channel), CRT/DAC
Embedded panel: eDP1.1 or LVDS
External panel: DP1.1, HDMI1.3a, LVDS, CRT/DAC.
Supports HDCP 1.3 & PAVP1.1c (D2550, D2700 & N2800/N2850 processor) for Blu-
ray playback while HDCP is needed for High Definition playback in Intel® Atom™ 
Processor D2000 and N2000 series