Справочник Пользователя для Omni Group GREEN SMART 864

© Travis Industries 

4090507 

100-01217_000 

 

Do not connect 110-120 VAC to the gas control valve or wiring system of this fireplace.  The switch and 

wiring must be installed by a qualified installer. 

This fireplace includes an optional wall switch (with wire) 
to operate the fireplace burner without accessing the 
internal on/off switch.  A thermostat may be used instead.  

Route the wire from inside the fireplace, through the 
grommet on either side of the fireplace near the gas inlet 
(see at right) to the switch.  The wall switch (or thermostat) 
may bypass the fireplace on/off switch or be installed in 
parallel or series configuration (see below).  

Caution: 

Label all wires prior to disconnection when 
servicing controls.  Wiring errors can cause 
improper and dangerous operation. 

Note: 

When using a GreenSmart™ remote, use the 
receiver for on/off operation (do not use a wall 
switch or thermostat). 

Warning:  Make sure all wiring is secure and does not 

contact hot or moving components. 

(included with fireplace)

Place "WARNING" 
label on switch cover.

 

 

On / Off Switch 

ON 

On / Off Switch 

OFF 

 

On / Off Switch 

ON 

On / Off Switch  

OFF 

Thermostat / External 

Switch ON 

Heater is ON 

Heater is ON 

Thermostat / 

External Switch ON 

Heater is ON 

Heater is OFF 

Thermostat / External 

Switch OFF 

Heater is ON 

Heater is OFF 

Thermostat / 

External Switch OFF 

Heater is OFF 

Heater is OFF 

To wire the heater in parallel, follow the directions below:

 

To wire the heater in series, follow the directions below: 

Thermostat

(or External Switch) Wires

On / Off Switch

 

 

On / Off Switch

Thermostat

(or External Switch) Wires