Справочник Пользователя для Axis Communications Video Encoder Blade AXIS Q7406

To gain access to the product, the password for the default administrator user 

root must be set. This 

is done in the ‘

Configure Root Password’ dialog, which is displayed when the AXIS Q7406 is 

accessed for the first time.

To prevent network eavesdropping when setting the root password, this can be done via an 
encrypted HTTPS connection, which requires an HTTPS certificate (see note below).

To set the password via a standard HTTP connection, enter it directly in the first dialog shown 
below. 

To set the password via an encrypted HTTPS connection, follow these steps:

1. Click the 

Create self-signed certificate button.

2. Provide the requested information and click 

OK. The certificate is created and the password can 

now be set securely. All traffic to and from the AXIS Q7406 is encrypted from this point on.

3. Enter a password and then re-enter it to confirm the spelling. Click 

OK. The password has now 

been configured.

4. To log in, enter the user name “root” in the dialog as requested. 

Note: The default administrator user name root cannot be deleted.

5. Enter the password as set above, and click 

OK. If the password is lost, the AXIS Q7406 must be 

reset to the factory default settings. See page 17.

6. If required, click 

Yes to install AMC (AXIS Media Control), which allows viewing of the video 

stream in Internet Explorer. You will need administrator rights on the computer to do this.

7. The Live View page of the AXIS Q7406 is displayed, with links to the Setup tools, which allow 

you to customize the video encoder.

To configure the password directly via an 

unencrypted connection, enter the 

password here.

To create an HTTPS connection, 

start by clicking this button.