Справочник Пользователя для Axis Communications Video Encoder Blade AXIS Q7406

AXIS Camera 
Management can 
automatically find and 
set IP addresses, show 
connection status, and 
manage firmware 
upgrades for multiple 
Axis video products.

1. Check that the AXIS Q7406 is connected to the network and that power has been applied.
2. Start AXIS Camera Management. 
3. When the AXIS Q7406 appears in the window, right-click the link and select 

Page:

• If the AXIS Q7406 is installed in an AXIS 291 1U, the AXIS Q7406 appears in the win-

dow with one entry for each of its six video inputs (e.g., AXIS Q7406(1)).

• If the AXIS Q7406 is installed in an AXIS Q7900, the AXIS Q7406 appears in the win-

dow with one entry for each of its six video inputs  (e.g. AXIS Q7406 Rack 2 Blade 1 
Channel 6) 

4. See page 10 for instructions on how to assign the password.

1. Select one of the AXIS Q7406s in AXIS Camera Management 

and click the 

Assign IP button.

2. Select 

Assign the following IP address and enter the IP 

address, the subnet mask and default router the device will 
use.

3. Click the 

OK button.

AXIS Camera Management speeds up the process of assigning IP 
addresses to multiple devices, by suggesting IP addresses from a 
specified range.

1. Select the devices you wish to configure (different models can be 

selected) and click the 

Assign IP button.

2. Select 

Assign the following IP address range and enter the range of 

IP addresses, the subnet mask and default router the devices will 
use.

3. Click the 

OK button.