Справочник Пользователя для Analog Devices OFD803
OCTO
²
/ QFX402
Chapter 7 : REMOTE CONTROL SOFTWARE (continued)
PAGE 39
7-3. COMMUNICATION SETUP (continued)
• CASE OF LAN PORT:
- With the front panel display menu of the device, verify the configuration of the LAN communication port
(CONTROL > LAN setup), then activate the LAN communication port (CONTROL > RS232/LAN port >
LAN).
- With the Controls menu of the software, select RS232/LAN setup and LAN Setup. Then configure the Local
port, the Remote IP address and the Remote port and click on Apply to setup the new values. The software will
also display Device connected.
- With the front panel display menu of the device, verify the configuration of the LAN communication port
(CONTROL > LAN setup), then activate the LAN communication port (CONTROL > RS232/LAN port >
LAN).
- With the Controls menu of the software, select RS232/LAN setup and LAN Setup. Then configure the Local
port, the Remote IP address and the Remote port and click on Apply to setup the new values. The software will
also display Device connected.
7-4. USING THE SOFTWARE
c Click on the Settings button (left bottom of the window) to display the Settings window.
d Click on the Input Settings tab and select the Signal Type for each input. Then make the others adjustments (video
Standard...).