Инструкции По Установке для Gaggenau VI491610

▯

Phillips Head Screwdriver

▯

Pencil

▯

Drill with ¼" (6 mm) bit

▯

Jigsaw

▯

Tape Measure

Note: Additional materials may be necessary for 
installation in solid surface countertops. Contact the 
countertop manufacturer.

The distance from the top of the cooktop to the 
bottom of cabinets above must be a minimum of A=30" 
(762 mm). This distance can be reduced to A=24" 
(610 mm) when the bottom of the wood or metal 
cabinet is protected by not less than ¼" (6.35 mm) 
flame-retardant millboard covered with not less than 
no. 28 gauge sheet metal, 0.015" (0.4 mm) stainless 
steel, 0.024" (0.6 mm) aluminum or 0.020" (0.5 mm) 
copper.

Verify that the cabinets above the cooktop are a 
maximum of B=13" (330 mm) deep.

9

To reduce the risk of ignition of surrounding 
combustible materials, install at least 
2" (51 mm) from both sidewalls and the rear 
wall.

The countertop must be level and horizontal. The 
stability of the countertop must be maintained after 
the cut-out has been made.

Solid surface countertops often require special 
installations. For example, heat-reflective tape and 
rounded corners may be necessary. Contact the 
countertop manufacturer for instructions specific to 
your countertop.

%

$