Справочник Пользователя для Invacare Adjustable ASBA Seat

SECTION 6—FRONT RIGGINGS

Adjustable ASBA Seat

Part No 1143238

70° and PW93

NOTE: For this procedure, refer to FIGURE 6.4.

1. Remove any accessory from the footrest(s).

2. Remove the footrest from the wheelchair. Refer to Installing/Removing Footrests on

page 24.

NOTE: Lay the footrest on a flat surface to simplify this procedure.

3. Remove the mounting screw, washers and locknut that secure the lower footrest

assembly to the upper footrest support.

4. Reposition the lower footrest to the desired height.

5. Reinstall the mounting screw, washers

and locknut that secure the lower
footrest to the footrest support and
tighten securely.

6. Repeat STEPS 1‐5 for the opposite

wheelchair footrest if necessary.

7. Reinstall the footrest(s) onto the

wheelchair. Refer to Installing/
Removing Footrests on page 24.

8. Reinstall any accessory onto the

footrest(s).

FIGURE 6.4 Adjusting the Footrest Height

- 70° and PW93

70° Taper

NOTE: For this procedure, refer to
FIGURE 6.5.

1. Remove any accessory from the

footrest(s).

2. Remove the footrest from the

wheelchair. Refer to Installing/
Removing Footrests on page 24.

NOTE: Lay the assembly on a flat surface to
improve access to the hardware.

NOTE: Note the position of the coved spacers
before disassembly.

FIGURE 6.5 Adjusting the Footrest Height

- 70° Taper

3. Remove the mounting screw and coved spacer that secures the lower footrest

assembly.

4. Position the footrest assembly to the desired height.

5. Secure lower footrest assembly with existing mounting screw and coved spacer.

Securely tighten.

Footrest Support

Coved

Washer

Mounting Screw

Lower

Footrest

Coved

Washer

Locknut

Coved Spacer

Mounting Screw

Heel Loop

Footrest