Справочник Пользователя для Therma-Stor Products Group D385

Скачать
Страница из 7
3
www.usephoenix.com • sales@thermastor.com
Toll-Free 1-800-533-7533
2 Operation
2.1 How the Phoenix D385 works
Your Phoenix D385 has two separate air streams that run 
through it – Process (Fig. ) and Reactivation (Fig. 2).
Process Air Stream:  
P1 – 385 CFM of air enters (2”flex) the top of the 
machine and...
P2 – ...water vapor from incoming air is deposited on the 
desiccant wheel.
P3 – 385 CFM of dry air exits (0” lay flat) the machine.
Reactivation Air Stream:
R1 – 75 CFM of air enters (6”flex) the lower-side of the 
machine and...
R2 – passes over the heater coils.
R3 – Water vapor is picked up from the desiccant wheel by 
the hot air and...
R4 – ...75 CFM of wet air exits (6”flex) the machine.
2.2 Avoiding Secondary Damages
The D385 is a powerful tool capable of removing a great 
deal of water from most environments. Care must be 
taken to avoid secondary damages of over-drying and or 
unexpected condensation.
Your Phoenix D385 removes vapor water from the incoming 
process air stream (Fig. ) and transfers it to the outgoing 
reactivation air stream (Fig. 2). The reactivation exhaust air 
is hot and wet. 
Take care to prevent the reactivation exhaust air stream 
from causing secondary damage due to condensation. 
If the reactivation exhaust air stream cools below its 
dewpoint liquid water will condense inside the duct work 
creating puddles. If the reactivation exhaust air stream is 
not exhausted completely from the structure it can also 
cause secondary water damage.
Your Phoenix D385 does not produce liquid water internal 
to the machine. There is no condensate pump and no 
drain hose.
The D385 desiccant dehumidifier will continue to remove 
water from already dry, cold air. It is possible to over-dry 
objects and or structures.
Care must be taken to avoid secondary damages due to 
over-drying.
2.3 Universal Use Set-Up
When conditions warrant the use of a desiccant 
dehumidifier, use the set-up shown below (Fig. 3). This 
universal set-up will produce efficient drying, while 
avoiding secondary damages. The Phoenix D385 has been 
designed with the goal of being easy to use every time.
Therm
a-Stor LLC
  |  M
adiso
n, WI  |
800-533-
7533
PORTABL
E DE
SICCANT
 DEHUMIDIFI
ER
PORT
ABLE D
ESICCANT DE
HUMIDIF
IER
Optional 12”
Flex-Duct
Optional 10”
Lay Flat Duct
385 CFM
385 CFM
Therma-Stor LLC  |  Madison, WI  |
800-533-753
3
PORTABLE DESICCAN
T DEHUMIDIFIER
PORTABLE DESICCA
NT DEHUMIDIFIER
Hot
Wet Air
Room or 
Outdoor
Ambient Air
Duct
Outside!
75 CFM
75 CFM
Optional 6”
Flex Duct
Required 6”
Flex Duct
Figure 1: Desiccant process air stream.
Figure 2: Desiccant reactivation air stream.
P1
P2
P3
R4
R1
R3
R2
Figure 3: Universal D385 Set-up
Therma-S
tor LLC  |  Mad
ison, WI  |
800-533-753
3
PORTABLE DESICCANT DEHUM
IDIFIER
PORTABLE DESICCANT DEH
UMIDI
FIER
6” Flex-Duct
75 CFM
75 CFM