Справочник Пользователя для Inter-Tel 3000

Inter-Tel 3000 
Administrator’s Manual 

 

 

 119 

System Programming options can also be programmed via a digital telephone set.  However, the digital 
telephone set must be connected to the extension that is programmed as the programming extension.  By 
default, the Programming extension is extension 20. 
You access all System Programming options via the PROGRAM key on the digital telephone set connected 
to the programming extension. 

•  From the Programming extension, press the PROGRAM key.  

•  Press the Scroll Down key ( ) until “System Programming” is displayed.  (The Scroll Up ( ) and 

Scroll Down ( ) keys can be used to scroll between the various screens). 

•  Select “System Programming”. Selecting “System Programming” from any extension other than the 

programming extension will result in the prompt “Programming Refused” being displayed. 

The following screen is displayed: 

•  Enter the System Programming Password, which is 1111 by default. 
Note: You can also enter System Programming by dialing ##1111 at the programming extension and 
selecting “Send Digits”. 
The following screen appears offering options to configure the overall system, the extensions, or the lines. 
 

 

•  Under “System”, you will find the programming options that affect the system as a whole. 

•  Under “Extensions”, you will find the programming options that affect the extensions. 

•  Under “Lines”, you will find the programming options that affect the incoming lines.