Справочник Пользователя для Inter-Tel 3000
Inter-Tel 3000
Administrator’s Manual
66
Multiple Call Park
The Call Park feature allows you to place up to 5 external calls on special hold by parking them in the
system. Any extension can then pick up the call.
system. Any extension can then pick up the call.
To Park and Retrieve a Call
• On a digital telephone set, select “Call Park” on the display.
• Select the “Park position 1-5”
• “Pick Up Park” is then displayed on the top line on the display on all digital telephone sets.
• Select “Pick Up Park” and the “Park position 1-5” to retrieve the parked call.
Note: A parked call will recall after three minutes if it has not been picked up.
On a standard analog phone, the code is Hookflash 712 (1-5)to park a call and 712 (1-5) to retrieve it.
Note: Once a call is parked, the extension must use the pick up park feature. Pressing the appropriate line
key can not retrieve the call.
Note: A parked call will recall after three minutes if it has not been picked up.
On a standard analog phone, the code is Hookflash 712 (1-5)to park a call and 712 (1-5) to retrieve it.
Note: Once a call is parked, the extension must use the pick up park feature. Pressing the appropriate line
key can not retrieve the call.
Barge-In
The Barge-In feature allows extensions break in on other extension calls. When an extension is
programmed to have the barge-in feature, the prompt “Barge-In” is added to the idle menu on the digital
telephone sets.
To barge-in on an extension select “Barge-In” on the idle menu. The extension list is displayed. Select the
extension to barge-in on. The extension must be on a call and this is indicated by a “
programmed to have the barge-in feature, the prompt “Barge-In” is added to the idle menu on the digital
telephone sets.
To barge-in on an extension select “Barge-In” on the idle menu. The extension list is displayed. Select the
extension to barge-in on. The extension must be on a call and this is indicated by a “
♦”.
If the barge in is successful the text “Barged-In” is displayed.
A programming option is available that disables the warning tone when barge-in is activated.
A further option is provided to protect extensions from “Barge-In”. If an attempt is made to barge-in on a
protected extension the display shows “Barge-In Prohibited”.
If barge-in is unsuccessful for any other reason the display shows “Barge-In Failed”.
Note: Barge-in is not allowed if the extension selected is not on a call, is transferring a call, is listening to
voice mail or is in a three way conference call.
Note: A maximum of three simultaneous barge-in and conference calls are allowed in the system.
From a standard analog telephone, “Barge-In” is activated by dialing the code 709 followed by the
extension number.
A programming option is available that disables the warning tone when barge-in is activated.
A further option is provided to protect extensions from “Barge-In”. If an attempt is made to barge-in on a
protected extension the display shows “Barge-In Prohibited”.
If barge-in is unsuccessful for any other reason the display shows “Barge-In Failed”.
Note: Barge-in is not allowed if the extension selected is not on a call, is transferring a call, is listening to
voice mail or is in a three way conference call.
Note: A maximum of three simultaneous barge-in and conference calls are allowed in the system.
From a standard analog telephone, “Barge-In” is activated by dialing the code 709 followed by the
extension number.
To Program extensions allowed to barge-in
In default no extensions are programmed to activate “Barge-In”.
• From the Programming extension, press the PROGRAM key.
• From the Programming extension, press the PROGRAM key.
• Press the Scroll Down key ( ) until “System Programming” is displayed.
• Select “System Programming”.
• Enter the System Programming Password and select “Extensions”.
• Press the Scroll Down key ( ) until “Barge-In” is displayed.
• Select “Barge-In Extensions”.
• Select the extensions that are to be allowed to barge-in. The extensions you select will have a “♦”
• Select the extensions that are to be allowed to barge-in. The extensions you select will have a “♦”
displayed beside them.
The default is that no extensions are allowed to barge-in.
To Program extensions protected from “Barge-In”
In default no extensions are programmed to activate “Barge-In”.
• From the Programming extension, press the PROGRAM key.
• From the Programming extension, press the PROGRAM key.
• Press the Scroll Down key ( ) until “System Programming” is displayed.