Справочник Пользователя для Inter-Tel 3000
Inter-Tel 3000
Administrator’s Manual
Administrator’s Manual
67
• Select “System Programming”.
• Enter the System Programming Password and select “Extensions”.
• Press the Scroll Down key ( ) until “Barge-In” is displayed.
• Select “Barge-In Protection”.
• Select the extensions that are to be protected from barge-in. The extensions you select will have a “♦”
displayed beside them.
The default is that no extensions are protected.
To Program “Barge-In” with or without tone
In default no extensions are programmed to activate “Barge-In”.
• From the Programming extension, press the PROGRAM key.
• Press the Scroll Down key ( ) until “System Programming” is displayed.
• Select “System Programming”.
• Enter the System Programming Password and select “Extensions”.
• Press the Scroll Down key ( ) until “Barge-In” is displayed.
• Select “Barge-In Tone”.
• Select Barge-In tone on or off. The selection is indicated with a “♦”.
In default tone is provided when barge in is activated. This is a single burst, which lasts for about a half a
second.
• Select Barge-In tone on or off. The selection is indicated with a “♦”.
In default tone is provided when barge in is activated. This is a single burst, which lasts for about a half a
second.
Paired Extensions
An extension can be paired with another extension. The full functionality of the master extension including
extension number and all programmed features, including voicemail, can be transferred to the alternate
extension, providing the user with all their normal telephony facilities at two different locations.
1. From the Programming extension, press the PROGRAM key.
2. Press the Scroll Down key ( ) until “System Programming” is displayed.
3. Select “System Programming”.
4. Enter the System Programming Password and select “Extensions”.
5. Press the Scroll Down key ( ) until “Paired Extensions” is displayed.
6. Select the master extension
7. Select the Alternate extension .The selection is indicated with a “
extension number and all programmed features, including voicemail, can be transferred to the alternate
extension, providing the user with all their normal telephony facilities at two different locations.
1. From the Programming extension, press the PROGRAM key.
2. Press the Scroll Down key ( ) until “System Programming” is displayed.
3. Select “System Programming”.
4. Enter the System Programming Password and select “Extensions”.
5. Press the Scroll Down key ( ) until “Paired Extensions” is displayed.
6. Select the master extension
7. Select the Alternate extension .The selection is indicated with a “
♦”.
In default no extensions are paired. From a standard telephone the code is 702.
Operator Services
You can choose to use an operator with the Inter-Tel 3000 telephone system. For example, the operator can
transfer internal and external callers to internal extensions.
transfer internal and external callers to internal extensions.
To call the operator
• Dial the code (0) for the operator’s extension.
• Dialing 0 from an extension rings group 11. This group contains extension 20 in default. See Group
Programming on page 38 if you want to call a different extension or to call more than one extension.
• When the digit 0 is dialed when listening to the Auto attendant prompt the call is presented to the
Group or extension that is programmed in the incoming ringing programming for the Line the call is
received on. (The default is that it rings Group 1).
received on. (The default is that it rings Group 1).
• When 0 is dialed when dialing through a voice mail greeting prompt the call is presented to the
Group or extension that is programmed in the incoming ringing programming for the Line the call is
received on. (The default is that it rings Group 1).
received on. (The default is that it rings Group 1).
To Intrude on a Trunk-to-Trunk Call
The Intrude feature is only available from extension 20, and is used to intrude on a call involving two lines,
that is when an external transfer or external forward has occurred.
that is when an external transfer or external forward has occurred.