Справочник Пользователя для Inter-Tel 3000

Inter-Tel 3000 

Administrator’s Manual 

  

 86  

 

•  Select “Confirm” when the code is entered. 
Press the speakerphone key to finish programming. 

With this feature, you can assign the extensions to a Class-of -Service that will operate when the system is 
in “Day Service”.  On power-up, all extensions are in class 1. 
 

•  From the programming extension, press the PROGRAM key. 

•  Press the Scroll Down key ( ) until “System Programming” is displayed. 

•  Select “System Programming”. 

•  Enter the System Programming Password and select “Extensions”. 

•  Select “Restriction Classes”. 

•  Select “Day Class of Service”. 

•  Select the class you want to assign to the extensions, (class 1 – class 6). 

•  Select the extensions to be entered in this class. 
Press the speakerphone key to finish programming. 
 
Note: When an extension is selected for class 1, 2 or 3, it will be automatically removed from other classes 
(except class 5 and 6). 

With this feature, you can assign the extensions to a Class-of -Service that will operate when the system is 
in “Night Service”.  On power-up, all extensions are in class 1. 
 
•  From the programming extension, press the PROGRAM key. 

•  Press the Scroll Down key ( ) until “System Programming” is displayed. 

•  Select “System Programming”. 

•  Enter the System Programming Password and select “Extensions”. 

•  Select “Restriction Classes”. 

•  Select “Night Class of Service”. 

•  Select the Class you want to assign to the extensions, (Class 1 – Class 6). 

•  Enter the extensions to be entered in this class. 
Press the speakerphone key to finish programming. 

You can wish to allow extensions to dial numbers entered in the System Speed-Dial list, which they are 
restricted from dialing directly.  For example, these could be numbers that extensions in Classes 2, 3 or 4 
cannot dial directly.  Entering these numbers into the System Speed-Dial list and activating this feature on 
the extensions allows the restricted extensions to access these numbers. 
By default, this feature is not activated on any extension. 
•  From the programming extension, press the PROGRAM key.    

•  Press the Scroll Down key ( ) until “System Programming” is displayed. 

•  Select “System Programming”. 

•  Enter the System Programming Password and select “Extensions”. 

•  Press the Scroll Down key ( ) until “Sys. Speed no. Override” is displayed. 

•  Select “Sys. Speed no. Override”. 

•  Select the extensions on which you wish to activate the feature.  Those extensions allowed to dial 

System Speed-Dial numbers not normally appropriate to their Class-of -Service are indicated by a “

♦”. 

Press the speakerphone key to finish programming. 
 
Note: Numbers on an extension’s Personal Speed-Dial list cannot override the Class-of-Service restriction 
of the extension.