Toshiba DKT3000 用户手册

The Direct Station Selection (DSS) console operates 

alongside of a digital telephone to provide 60 

additional buttons. The 3000-series telephone requires 

a 3000-series DSS; the 2000-series telephone requires 

a 2000-series DSS. An example of the DDSS3060 is 

shown right. The DDSS2060 (not shown) looks similar 

and has the same button/LED functions.
The buttons can be programmed as DSS, outside Line, 

All Call Page, Night Transfer, and Station or System 

Speed Dial. LEDs on the DSS light or flash red or 

green, depending on the status.

Button numbers in the above figure are 

examples only.

DSS buttons can appear on both the DADM and DSS 

Console. Each DSS button is associated with a 

particular station in your telephone system. DSS 

buttons can transfer an outside call to the associated 

station or make a direct call to the associated station. 
The DSS LED lights steady red when the station associated with the DSS button is ringing, busy on a 

call, or when the associated station is idle, but all appearances of the station’s extensions are busy or 

in-use by other stations. When the associated DSS button is in the Do Not Disturb mode, the LED 

blinks red at a slow rate.
DSS buttons cannot call station Phantom extension numbers, Distributed Hunt Group Directory 

Numbers, or ACD Groups. DSS buttons may be configured as One Touch Buttons that may be 

programmed to call these destinations.

The LED colors described in this section apply to the DADM3020 and DDSS3060. Described Flash/

Recall conditions apply to all DSS console models and the DADM.