Toshiba DKT3000 用户手册

You can transfer a call to a busy station from either a DSS console or an DADM. Use the DSS to 

transfer the call, even though the DSS LED associated with the station you are “transferring to” is red.

➤

To transfer call to a busy station
1. Press DSS corresponding to the busy station to be called.

You may hear a busy tone. The original caller is placed automatically on hold. The Line or extension 

LED flashes green at double the on-hold rate, and the DSS LED remains steady red.

2. Hang up.

The call rings the called station once with the camp-on tone. While the called station is receiving this 

tone, the Line LED flashes green (on-hold rate) or if you are on a extension button, it goes idle. The 

[DSS] LED remains steady red.
When the called station answers the transferred call, the Line LED becomes steady red. The [DSS] 

LED remains steady red. 

If the busy station is in the Do Not Disturb mode, the call will not transfer, but will recall your 

telephone immediately.

If the call is not answered after a specified Recall time set in system programming, camp-on is 

cancelled and the transferred call rings back.

If your DADM or DSS console is equipped with a 

Line

 button, you can answer outside line calls 

from the DADM or DSS console as you would from a digital telephone.

➤

To answer an incoming outside line call to a DADM or DSS Console, press the flashing 

Line

.

Your DADM or DSS console may be equipped with 

SD

 (Speed Dial) buttons that can be programmed 

to dial telephone numbers or to access features. 

SD

 buttons on either the DADM or DSS console 

function like 

SD

 buttons on digital telephones.