Toshiba DKT3000 用户手册

You can make an announcement page to a group of  telephone speakers selected in system 

programming with 

All Call Page

 on the DSS console. 

SD

 (if programmed) on either the DSS 

console or the DADM can be used for page announcements. See 

.

Either the DSS buttons on your DSS console or the associated telephone can be set in system 

programming to ring stations that are in the Call Forward mode, instead of being forwarded. Usually 

the console’s telephone is the unit activated to perform this function. Among other applications, this 

feature can be used to notify a person who forgets to deactivate the Call Forward feature after 

returning to the office.

➤

To override call forward with the console’s associated telephone
1. Press 

Cnf/Trn

 or extension button.

2. Dial the station number set for call forward.

Make the call as you would from any other station. This procedure assumes your station has a typical 

program setting.

➤

➤

Press the station DSS button set for Call Forward.

This button enables a pre-programmed station to place the system into Day, Day2 or Night Mode. See 

your System Administrator for information on the settings for Day, Day2 or Night Mode. Usually, 

these modes will transfer calls to a designated location or voice mailbox, depending on programming.

1. Press 

Night Transfer

.

2. Press the desired Mode number:

♦

Press 

1

 for Day Mode (LED remains off).

♦

Press 

2

 for Day2 Mode (LED flashes red).

♦

Press 

3

 for Night Mode (LED is solid red).