Razor 360 用户手册

3

 ASSEMBLY AND SET-UP

       WARNING:  Failing to 

properly tighten the steering bolt 

that attaches the handlebar can 

cause you to lose control and fall.

2

 Remove the four Allen socket 

screws and nuts from the front 

fork with a 10mm open wrench 

and 5mm hexagonal wrench.

3

 Insert the wheel assembly into 

the front fork assembly and align 

holes.

Note: Refer to R (right) and L (left)  

stickers on pedals for orientation.

❑ 

Attaching the Pedals and Front Wheel

4

 Re-insert the Allen socket 

screws through the front fork and 

secure with nuts. Tighten nuts with 

a 10mm open wrench and 5mm 

hexagonal wrench.

1

 Remove the steering bolt and 

locknut from the frame assembly 

with a 13mm open wrench and 

5mm hexagonal wrench.

2

 Insert the front fork assembly 

into the frame assembly. 

❑ 

Attaching the Front Fork

4

 Re-insert the steering bolt and 

secure with locknut using a 13mm 

open wrench and 5mm hexagonal 

wrench.

1

 Install the left pedal into the 

crank marked (L). Tighten with 

15mm open end wrench. Repeat 

step for right pedal and crank.

3

 Be sure to align slot in headset 

tube with pin on fork properly as 

shown.

       WARNING:  Failing to 

install the correct pedal on the 

correct crank (left and right) can 

cause the pedal to strip.