Razor 360 用户手册

4

4

 Locate the threaded hole 

on the rear underside of frame. 

Screw caster wheel into hole.

5

 Tighten with 5mm hexagonal 

wrench.

❑ 

Attaching the Rear Caster Wheels

1

 Remove the four Allen socket 

screws and Allen long screws 

from the frame with two 5mm 

hexagonal wrenches. One on top 

and one on bottom.

2

 Align four holes in seat with 

four holes in frame. Insert Allen 

long screws through the bottom of 

the frame.

❑ 

Attaching the Seat

 ASSEMBLY AND SET-UP

3

 Secure with Allen socket 

screws. Tighten screws with two 

5mm hexagonal wrenches. One on 

top and one on bottom.

2

 Insert one small spacer between 

wheel and caster and align holes. 

Insert axle bolt through caster, small 

spacer, wheel and into small spacer 

on other side of wheel.

Need Help? Visit our web site for replacement parts, product support, live chat and a list of  
authorized service centers at 

www.razor.com or call toll-free at 866-467-2967 Monday - Friday  

8:00 AM - 5:00 PM Pacific Time.

3

 Insert Allen socket screw 

through caster, small spacer and 

into axle bolt. Tighten with 5mm 

hexagonal wrench on both sides.

1

 Insert large spacer into wheel 

and insert bearings into each side 

of wheel. Make sure all holes are 

aligned. Insert wheel into caster.