Bosch F.01U.278.516 用户手册
14
en | Installation
Relay Unit
F.01U.278.516 | V1.0 | 2012.11
User Manual
Bosch Security Systems
3.2
Installation
3.2.1
Generalities
Install the Relay Unit in a dry place, away from any source of heat.
Tools required:
–
Torx T20 screwdriver.
–
Torx T10 screwdriver.
3.2.2
Installation on a piece of furniture
It is recommended to place the Relay Unit on a non-slippery surface. However, do not place
anything (blanket or lace) on top of the unit.
3.2.3
Wall installation
You can fasten the Relay Unit on a smooth wall surface using two screws. The distance
between holes is 6.2 in (157 mm).
The power line cord should be placed inside the cable channels on the bottom of the Relay
Unit.
3.2.4
Installing the antenna
1.
Use the straight adapter (4) for wall installation or the right angled bended adapter (3)
for installation on a piece of furniture.
2.
Fasten the adapter (3) or (4) on the antenna connector (1).
3.
Fasten the antenna (2) on the adapter.
2
3
2
4
1